How do I sync my DIN sync equipment to Pamela’s PRO Workout?

Using the ALM-UT001 Din-Sync Adapter Cable, two of Pamela’s PRO Workout’s outputs can be used to sync vintage drum machines and synthesisers that feature a DIN Sync socket:

• Set one of Pamela’s NEW Workout’s outputs x24.
• Set another output to ‘On’ (instead of a divisor/multiplier on the main modifier page).
• Connect the ALM Din-Sync adapter’s 3.5mm jacks, labeled ‘clock’ and ‘run’ to these outputs respectively.
• Connect a 5 Pin Din cable from the adapter to your external equipment’s DIN sync socket.
• If your equipment fails to respond to the Pam clock, check the cable you are using has all 5 pins connected. Not all midi cables do.

Note using either of the PPEXP1 or PPEXP2 expanders eliminates the need to use two dedicated channels.

The ALM-UT001 Din-Sync Adapter Cable can also be used to sync Pamela’s PRO Workout to your external equipment’s clock:

• Connect the adapter's ‘clock’ jack into Pamela’s PRO Workout’s clock input and the Run jack into the Run input.
• Make sure Pamela’s PRO Workout is set to expect a 24 PPQN clock and ‘Run’ is set to ‘Y’ (See these options by long holding on BPM screen).

Also see -